WE ARE CURRENTLY UPDATING OUR RAYTECH WEBSITES - SORRY FOR ANY INCONVENIENCE. TO PLACE AN ORDER, PLEASE CONTACT OUR CUSTOMER SERVICE TEAM AT 800-243-7163.

Centrifugal Magnetic Finishers

What is a Centrifugal Magnetic Finisher?

The machine is a direct drive, fan cooled design. Its magnetic disk is made up of many powerful magnets that are precisely placed in a cast disk. The alternating polarity is consistantly changing, thereby allowing the media to move freely in a liquid solution that constantly changes its makeup. This, combined with centrifugal force, allows for super quiet and fast cycles.

Magnetic finishing presents itself as the pinnacle of methods to efficiency burnish and polish small non-ferrous metals. With stainless steel pins as small as .010 inch diameter and .250 inch in length, they are able to work in areas such as undercuts, recesses, slots, etc, where no previous method has been found suitable. Centrifugal magnetic finishing is quiet by comparison to many other forms of finishing. On soft non-ferrous metals, the finishing cycle can be as low as 30 minutes. This alone assures faster turnaround time on parts when compared to any other method. Centrifugal magnetic tumbling as an automated process addresses the most intricate and detailed parts imaginable in finishes where others fail. It should be noted that on large, smooth or flat surfaces the finish will appear frosted and a slight buffing or a dry finish is recommended.

Raytech Flex-System: Only with Raytech's Flex-System can you utilize 3 types of functions. Raytech models 410 and 610 have compatible bowls.(Models 400, 900 and 1200 use wet burnishing pins only.)

Wet Burnishing Pins:

  • High luster burnishing
  • Edge smoothing/light radiusing

Abrasive (wet): CBW bowls required

  • Surface Refinement
  • Edge radiusing
  • Uniform surface quality
  • Cut down

Dry Processing: CBD bowls required

  • Decorative finish
  • Bright, refined and uniform buff-like, high luster quality

Change and rinse as frequently as required to keep the process clean.

Centrifugal Magnetic Finishers

Model HP Pin Capacity (Grams) Ring Capacity Forward/ Reverse Function Variable Speed Bowl Diameter Timer Voltage Available Shipping Weight
            In mm   115V 60 Hz 230V 50 Hz    
CMF-400 1/32 100 8-12 No No 4 100 M* Yes Yes 17 lbs
CMF-410 1/32 100 8-12 Yes Yes 4 100 P* Yes Yes 17 lbs
CMF-610 1/12 200 30 Yes Yes 6 150 P* Yes Yes 25 lbs
CMF-900 1/3 400 100 Yes Yes 9 230 P* Yes Yes 55 lbs
CMF-1200 1/3 800 225 Yes Yes 12 300 P* No Yes 50/60 Hz 85 lbs

   P* - Programmable

   M* - Mechanical