WE ARE CURRENTLY UPDATING OUR RAYTECH WEBSITES - SORRY FOR ANY INCONVENIENCE. TO PLACE AN ORDER, PLEASE CONTACT OUR CUSTOMER SERVICE TEAM AT 800-243-7163.

Vibratory Tumblers: Finishing Systems

AVT-250 Fast Finisher

Portable mass finishing work center

The Raytech AVT-250 System, coupled with the MS-75 Separator, will handle a myriad of applications including deburring, descaling, flash removal, cleaning, polishing, and burnishing. It has a capacity of 2.5 cubic feet. When combined with the optional media separator, the system truly offers a portable mass finishing work center that makes it ideally suited to cellular manufacturing. CE

  • Cabinet Construction: 14 gauge formed, reinforced and welded steel; complete sound insulation with cover to keep noise level below 80 db.
  • Tub Construction: Continuous welded tub of 11 gauge steel with one-quarter inch steel angle reinforcements; 80-90 durometer urethane lining of one-half inch minimum up to one inch in wear areas; 5-inch urethane discharge chute; easily changed 2.5 x 5-inch drain.
  • Drive System: 1-inch steel shaft with high energy counterweight; heavy duty bearings for continuous use; quick change amplitude; enclosed shaft housing; vibration absorbing, self-aligning belts.
  • Electrical System: 1 hp motor; 3450 rpm motor allows for use of a high-energy shaft to impart greater action to the tub; water tight cord connection; water tight electrical box; single phase.
  • Internal Compound System: Self-contained recirculating system, which cuts down on water usage and waste disposal; easily converted to permanent installation with room underneath for plumbling for full flow-through operation.

Shipping Weight AVT-250: 500 lbs, 15 cubic feet

Shipping Weight AVT-250 System: 633 lbs, 32.75 cubic feet

AVT-250 Fast Finisher

AVT-250

Overall Dimensions: A=42", B=22 3/4", C=27 1/4", D=26 1/4"

Tub Dimensions: 6E=19 3/4", F=15 1/4", G=15"



Description Part # Price Instructions FAQ
AVT-250 (115V, 60 Hz, 13.0 amps) 23-056 $5397.29 AVT-250 Finishing Systems
Replacement Parts:
Replacement Lid 09-340 $400
Tub Drain 09-349 $72
Tub Springs 09-359 $13
Set of Drive Belts (2) 09-377 $37
Bearings (Each) (Requires 2) 09-352 $180
Bearing Mounting Kit 09-353 $17
Discharge Plug Assembly (T-Handle) 09-362 $160